attempt a review with less than 6 months carrying it every day, which I have done. Since this is my fourth Spyderco over the last couple years, I am starting to feel confident that I have a decent understanding of them, especially the lightweight FRN type models, which I have mostly focused on since I like to carry light.
Product DescriptionPrice: $60-$100 Online
This is a mid-size pocket knife with a fairly typical lock-back design. Made in Seki City, Japan it features VG-10 steel and a Fiberglass Reinforced Nylon (FRN) handle, with a deep carry clip. There are several other knives in this product line, including the slightly-smaller Dragonfly and the slightly larger Endura.
Official Specs (From Amazon)
- 7.125-inch open length
- 4.25-inch closed length
- 2.875-inch VG-10 steel blade
- 2.56-inch cutting edge
- 0.5-inch blade hole
- 0.09-inch blade thickness
- 2.5-ounce weight
- FRN handle material
This is a clearly a pocket knife designed for enthusiasts who can appreciate everything that went into it, and a lot went into it. I think their two main design goals were 1) ergonomics and 2) functionality. As far as the ergonomics goes, this knife fits my hand perfectly. If you have really large hands, the ergonomics on the Endura would probably be better for you.
The looks of this knife are derived from its functionality, not the other way around. That's the brilliance of the design I think. It looks cool because they didn't try to make it look cool.
Wow. My new precious. That was my initial impression. And then, a little sadness knowing that my trusty Dragonfly would never see the same use. The Delica 4 is pretty much my perfect EDC as far as size, weight, design and functionality. It's just a slightly larger Dragonfly, elongated just a little. The first thing I noticed, was that I felt it in my pocket, where I never did feel the Dragonfly or Ladybug.
Construction / Build Quality
The Delica has a reputation for build quality and my review sample doesn't disappoint. The FRN handles are a little rough around the edges, but the handles themselves are solid and so is the rest of knife, including the clip. The knife is put together with all Torx T7 screws, which are all the same size execpt for the pivot screw, which is a Torx T8.
The blade on the Delica is well constructed. The Japanese know steel, and Spyderco really knows how to make a flat ground blade. This isn't a $300 shelf queen, so the blade you are getting is more of a workhorse. There are phosphor bronze washers located on either side of the pivot screw.
The screws look a little cheap, but I was able to get a firm grip on all the T7 screws as well as the T8 pivot screw with my good quality screwdrivers. I don't generally take apart my knives, but I reserve the right to.
Fit And Finish
The fit and finish on my sample is good overall. Out of the box, the texture material is a little rough, almost even sharp. But it wears in quickly and after a week or so has a great feel. Most of my Spyderco knives seem to have something that starts out a little rough and wears in. It can be a little disconcerting, but I'm OK with it because at this point I trust that I'm buying a good knife. The handle on the Delica is like a pair of boots; it takes a while to wear in before it's comfortable. The FRN handles almost look better at 6 months than they did out of the box.
The blade on my sample is little off center, but not enough to trigger any OCD.
|Off center, but not enough to affect the functioning of the knife|
The handle is made of Fiberglass Reinforced Nylon (FRN) which is really strong and really light. It has what
they call "bi-directional texturing" which basically means that the texturing sticks out at different angles, giving the knife a good grip.
On the back of the handle is some jimping. It seems to be inset a little so it's not as grippy as it looks like it should be. Most of the time I get a solid, natural grip, and just choke up on it for those few other times.
I used to take the clips off all my knives, just right out of the box. But the bigger knives are so much more comfortable to carry with a deep carry clip, so for the Delica it never came off. After 6 months of hard use, the clip still has a good tension on it. As shown in the picture at left, the anodizing on the clip has held up well.
Not being a metalurgist, I can say from personal experience that VG-10 is a very good steel for EDC knives. There is also a version of the Delica which has ZDP-189 steel. Maybe I'll get one some day, but I'm skeptical that this VG-10 blade could be improved on much.
My Delica has a Full Flat Grind (FFG) on it which I'm a big fan of. It's just one of the many touches that add up to this knife being all business. Some people think the leaf blade shape is weird, but I think it's ideal. One thing is for sure, you either "get" most of these Spyderco knives right away or you don't.
The longer shape of the delica almost gives it a more traditional shape since the "leaf" shape is elongated so much. The "spydie hole" is at a perfect location for my thumb to easily reach it. It has a little big of jimping behind the hole. I have found that in normal use my thumb never really makes it past the jimping on the back of the handle.
Like my other Spyderco FRN knives, the blade on the Delica seems a little on the thin side at first glance. I use mine as a knife and not a pry bar or other tool, so I've found the blade thickness to be more than acceptable for daily use. It's thin enough to make easy work of slicing tasks such as opening mail or dicing a potato, but it's thick enough to slice a garden hose or go through thick cardboard. The blade design does more with less steel, and makes the knife lighter. I have folders half its size and twice the weight. So I would say the blade thickness is a near perfect balance for the kinds of tasks most people would reasonably use it for.
The FRN knives in this series all use a back lock mechanism. It's a very good implementation, but not as strong as other types of locks. But it's very light, and it's still plenty strong. People use them to baton firewood.
Personally, I would rather it be lighter than a little stronger, and I like the feel of lock-back knives in general. My philosophy is that if I'm stressing the lock too much, I'm using the wrong tool. If I have any doubts about what I'm cutting, I just go grab a fixed blade.
The deployment on mine has been silky smooth from day one and has stayed that way, unlike the USA-made Native I bought with the same order, which took some time for the lock to wear in. I open mine with a steady motion of my thumb, smooth and steady. The way I close it is probably different than most. I extend my index finger to the spydie hole while my thumb presses on the lock, which disengages the blade from the lock. Then I flip the knife sideways a little and grab the thumb hole with my thumb, and from there it's the reverse of deployment. I explain it in text and people still scratch their heads, so I've made a video.
Some people are disappointed to find out that the Delica cannot be "flicked" open like it's Chinese cousin, the Tenacious. If you want a lightning quick deployment, look to that line, which will all be liner locks, as well as much heavier. At best, the Delica will give you a nice steady one-handed open that most people like the feel of.
|I close mine by unlocking it this way, and just flipping it around and closing it with my thumb|
I found another interesting way to open it, just farting around since it's always in my pocket. The "Delica Flick!"
I carried the Dragonfly mostly steady for about a year, and the Ladybug before that. The Dragonfly was just
a tiny bit short of being my ideal EDC. The Delica is good a few things its cousin the Dragonfly isn't, such as the random food prep I use it for.
|It can fill in as a camp knife|
This has been my precious since I first took it out of the box. It's not much more steel than the Dragonfly, but for my hands, it has superior ergonomics with the ideal EDC blade size for me. I still carry the Dragonfly because sometimes the Delica is a little conspicuous, and I still sometimes like to carry other knives, like the SRM 763 or Native just for variety. But when I think about getting stuff done, my first thought is the Delica. It's a heck of a lot of knife for 2.3 ounces.
I have not been kind to my Delica, either. It's a tool, and I treat it as such. I have plenty of beaters I can use, especially fixed blades, but 99% of my daily use is my EDC. After 6 months of hard use, the clip is a little worn, and it's a little loose and should probably be tightened soon.
Like its kin, the VG-10 steel of the Delica holds an edge well. It can also be a little challenging to novice sharpeners like me. But it's well worth learning to sharpen the VG-10 and you get a lot of use between sharpenings.
|Typical Spyderco red box|
|You'll need T7 and T8 Torx screwdrivers to disassemble|
|From Top: Spyderco Delica, Spyderco Native, Spydero Dragonfly|
|Sharpening with a coffee cup|
|It's my go to pocket knife for serious jobs|
|Shown with my Nitecore MT1A [1xAA] EDC Flashlight|